when to change your vape coils

How to Know When to Change Your Vape Coil?

when to change your vape coils in

Picture this: it’s your first vape break of the day, and you’re ready to indulge in that smooth and relaxing break away from your hectic schedule. You lean back in your chair, pick up your favourite vape device, turn it on, and…ugh!

The taste is too harsh, almost burnt. There goes the zenful moment you anticipated. That unpleasant twist of events rings a warning bell – it’s time to change your vape coil. This guide will lead you through clear signs indicating when to seize the moment and swap out your old coil for a fresh one – ensuring your experience always stays enjoyable.

Take the guesswork out of maintaining your device with our step-by-step breakdown.

You should change your vape coil when you start to notice a burnt taste or a significant decrease in vapor production. Coils can last anywhere from a few days to several weeks depending on usage and the type of e-liquid used. It is important to take care of your coil by priming it properly and regularly cleaning it to extend its lifespan. Additionally, an inspection of the coil’s appearance can indicate buildup or discoloration that may signal the need for replacement. Remember, it is recommended to change the coil after using high VG e-liquids, as they can cause the coil to gunk up faster. Lastly, overheating the coil or chain vaping can shorten its lifespan and increase the frequency of needed replacements.

Understanding Vape Coil Functioning

It is essential to understand how a vape coil works to know when and why it needs replacement. A vape coil typically comprises steel wire inside a wick, which is wrapped in a specific pattern to support heat production. When the coil is activated by the battery, it warms up and vaporizes the e-liquid present in the wick. The thickness of the wire and the number of wraps determine the resistance level of a coil.

The fundamental principle behind vape coils is heating – coils generate heat through electrical resistance, which in turn vaporizes e-liquid. The temperature at which the coil becomes heated varies based on several factors, including wattage, airflow, and e-liquid viscosity. In essence, vape coils operate like light bulbs that generate heat when an electric current passes through them.

Think of a typical light bulb for a moment – if you use it continuously beyond its projected lifespan, it will eventually burn out because of the heat generated by the filament. The same goes for vape coils; they naturally degrade over time because of multiple factors like usage, quality of e-liquids used, voltage supplied to them by batteries, and more.

Additionally, some vapers prefer using lower or higher resistance coils than what their vaporizers are designed for to get optimal results from either end of the spectrum. Using coils with low resistance results in more considerable vapor production but considerably less flavor while high-resistance coils have less vapor production but deliver richer flavors.

However, some arguments suggest that lower-resistance coils lead to an overall better vaping experience owing to increased cloud production while others argue that using higher resistance options makes all the difference in terms of flavor. Regardless, going too far in either direction can significantly impact coil lifespan.

With this basic understanding of how vape coils function behind us let’s move on to comprehending the different types of vape coils that are currently present in the market.

What is a Vape Coil?

Vape coils come in various types and materials, differing mainly by coil resistance levels and build quality. Although there are several varieties of coils available in the market, four primary coil categories include:

– Standard Coils
– Clapton Coil
– Twisted Coil
– Alien Coil

Each type offers unique benefits and can significantly impact your vaping experience. The Classic Standard Coil is the most common type available in the market. It’s used for its affordability and ease of use. However, they don’t last as long as some other alternatives. Clapton Coils take standard coils to the next level with their multiple wire configuration, resulting in more significant surface area for better vapor production and flavor intensity.

Think of it this way – a Classic Standard Coil is like a sedan car – popular, easy to use, and affordable, but not exotic or premium. On the other hand, Clapton Coils are akin to having a luxury sports car – costlier but offer an incredible experience with higher performance and flavor build-up.

Twisted Coils consist of two or more wires twisted together, resulting in a density-rich surface area that produces highly concentrated vapor with lesser wattages than compared to standard coils. Lastly, Alien Coils have flat outer wire wrapped around spaced interior wires resembling UFOs when seen at close range – hence their name.

Vapers usually prefer twisted and alien coils because of their superior surface area coverage and ability to create denser vapor clouds. However, special equipment is required to make these kinds of coils, which makes them less ubiquitous than standard ones.

Nonetheless, debate exists between comparing two identical-looking coils; one made from Kanthal wire while the other using Nichrome wire which delivers superior flavor intensity. The jury is still out on which material makes for a better vape coil, but experienced vapers often claim that Nichrome heats up faster than Kanthal and provides a more flavorful vaping experience.

Coil Lifespan: How Long Should It Last?

As a vaper, the question of how long your coil lasts is bound to come up frequently. Unfortunately, there isn’t a definitive answer, as several factors can influence its lifespan. The type of e-liquid used and vaping frequency are two essential factors that significantly impact its lifespan.

The thickness of the e-liquid influences how quickly the coil becomes clogged with debris or gunk. As such, high VG e-liquids can wear down the coil much faster than their PG counterparts since they tend to produce more residue buildup.

Another vital component that affects your vape coil’s lifespan is your vaping style. Heavy vapers who consistently puff on their devices will find themselves needing to replace their coils more often than those who use their devices less frequently.

However, while many factors can affect a vape coils lifespan, an average one can last anywhere from 5 days to 3 weeks. That makes it essential for vapers to pay attention to warning signs that indicate when a replacement might be necessary.

Coils typically last between five days and three weeks before requiring replacement.

Nonetheless, other individuals have used the same vape coil and found it could last for months with proper care. Priming your coil ensures its longevity by soaking it in e-liquid before use – allowing it to absorb enough liquid in the cotton wick, preventing dry hits and burnt taste.

Moreover, taking proper care of your vape tank should also extend the lifespan of your vape coil. Cleaning out any gunk or debris build-up regularly will prevent any unnecessary blockages in your device.

Identifying Coil Replacement Signs

Coil replacement is an inevitable aspect of vaping; sooner or later, you will need to change it. However, before you reach that point, your coil will show noticeable signs of wear and tear, sometimes long enough for you to replace it with a new one before it gets too late.

Primarily, the most common sign that your coil needs replacement is a burned or dry taste while vaping. This occurs when the burnt coil transfers the unpleasant taste and odor to your e-liquid. A strong sign this is happening is finding yourself frequently adding extra juice without any discernable effect.

Another clear warning sign that your vape coil needs replacing is when you notice a gurgling sound when taking a puff. This indicates a flooded tank caused by an excessively worn-out coil that typically lacks sufficient air intake or allowing too much e-juice to enter the device.

Additionally, vapers might experience little to no flavor or nicotine output from their device when using the same e-liquid they always have for the same duration as usual. This could be due to several reasons such as saturation, obstruction of airflow or an old coil. You may want to consider examining other possible causes depending on how often you use your vape, whether it requires regular charging and whether it has been well-maintained.

Keeping track of how frequently you use your vape device can also provide insight into knowing when best to change its coil. Often regular vapers report the need to swap out coils every couple of days while casual vapers find themselves swapping out every four weeks.

Think of a car’s engine; like any vehicle engine that needs maintenance and oil changes regularly, so does your vape device. Just as driving conditions determine how soon an oil change is needed in your car, likewise does vaping style impacts how long before your vape coil needs replacing.

With proper care and attention to signs indicating its malfunctioning state; you can confidently perform in-depth Coil Exchange practices familiar with the warning signs and indications of a failing coil.

Issues with Flavor and Nicotine Output

Vape coils are an essential component of your electronic cigarette, and they ensure that your e-liquid turns into inhalable vapor. However, vape coils don’t last forever and require replacement periodically. It’s crucial to know when to replace a coil to avoid damaging your device or affecting the quality of your vaping experience.

One of the most noticeable signs that it’s time for a coil change is issues with flavor and nicotine output. If you’re experiencing bland or burnt tastes when vaping, then it’s likely time to replace your vape coil. The same goes if there is reduced vapor production than you usually experience.

Imagine driving a car where the engine starts making noise or stops producing the expected speed. You wouldn’t wait until the car shuts down on you before taking it for maintenance, right? The same should apply to your vape coil as well. Don’t wait until it’s too late to replace your vape coil.

Ignoring the need to change your vape coil when it’s due can lead to many consequences that will ruin your vaping experience. In some cases, a dirty or worn out coil can affect the taste of your e-liquid, making it less enjoyable and even unbearable. A bad-tasting e-liquid can also put you off vaping and may prompt you to return to smoking.

Some vapers prefer to tolerate poor flavor quality rather than change their coils frequently, primarily because coils aren’t cheap. While this mentality may save costs initially but using a worn-out vape coil will affect the quality of your vaping experience in terms of flavors and clouds, prompting more frequent replacements in the long run.

Transition to a New Coil

Changing your vape coil isn’t rocket science, but there are some essential aspects to be mindful of when making the switch. One critical element is adjusting to different strength and flavors.

A new coil can provide a fresh start for your vaping experience, but it may take some time to adjust since it could alter the flavor and nicotine levels of your e-liquid.

Suppose you are changing your coil from a previous experience of 0.6ohm resistance to a new one with a resistance of 0.12ohm. You would need to find a sweet spot that balances flavor, vapor production and throat hit without affecting the overall experience.

When settling on a new coil, ensure that you understand its specifications well enough to make an informed choice. For instance, you should be aware of the recommended wattage range and voltage limits for optimal results.

It’s also advisable to prime your coil before use by saturating it with e-juice for at least ten minutes before vaping. This way, you avoid any unpleasant burnt-tasting hits or dry hits while breaking in your new vape coil.

Adjusting to a new coil is much like getting used to a new pair of shoes. Initially, they may feel off and uncomfortable until they get broken in after using them for some time. Like with shoes, understanding how a new coil works and finding the right way to do it will result in an enjoyable experience.

With patience and keen attention to detail, transitioning to a new vape coil shouldn’t be an arduous task.

Adjusting to Different Strength and Flavors

When you change your vape coil, it may take some time to adjust to different strengths and flavors. This is because the coil plays a significant role in the overall vaping experience, including the intensity of nicotine and flavor output. Here’s what you need to know about adjusting to different strengths and flavors after changing your vape coil.

For example, switching from a high-strength nicotine e-juice to a low-strength one may result in less throat hit and less nicotine intake per puff. Conversely, moving from low strength to high strength could result in more intense throat hit and increased nicotine absorption. Similarly, if you switch from a fruity flavor to a dessert flavor, you may notice an entirely different taste experience due to differences in sweetness levels, depth of flavor, and aroma.

The trick is to start with small adjustments and gradually increase or decrease based on your preferences. A general rule of thumb is to allow for about 24 hours for full adjustment after switching e-juices. It’s essential not to rush into changing after some vape puffs that don’t satisfy you since it will take some time for your palate to redefine each new flavor.

On the other hand, authorities suggest that avoiding e-juice additives could help in achieving an optimal taste when vaping on varying flavors.

Tips for Optimal Coil Change Practices

Changing vape coils is a vital maintenance practice that keeps the device working efficiently and prolongs its lifespan. Besides improving vapor production and flavor quality, maintaining the coil helps prevent issues like leaking, gurgling sounds, and burnt hits. Here are some tips to help you optimize your coil change practices.

First, ensure that you replace the vape juice when changing coils. This is because replacing the coil on an e-cigarette that has not been cleaned could lead to the accumulation of unwanted particles and diminishing taste quality due to lingering ingredients from the previous batch.

Secondly, always prime your new coil before using it. Priming is a process of saturating your wick with vape juice before using it to ensure that it delivers optimal flavor and doesn’t burn out prematurely. To prime your coil correctly, place a few drops of e-juice directly on the cotton wick material inside the coil. Allow up to 15 minutes for the wick to saturate correctly.

Think of priming your coil as akin to allowing a cake batter to rise properly in preparation for baking. Just as insufficient rising time leads to undercooked or dense baked goods’ poor quality, failing to prime your coils could lead to low vapor production, burnt hits, and shortened lifespan.

While some vapers might suggest shaking their new coils after priming them, shaking could cause damage. Doing so can cause the cotton fibers in the coil’s wicking material to break down or bundle together, reducing optimal juice absorption over time.

Finally, clean your e-cigarette regularly to prolong your coil’s lifespan while promoting optimal flavor output. You should rinse and dry all the parts regularly with each wash resulting from non-use periods.

Overall, proper maintenance of vape coils is essential for achieving optimal flavor output, preventing device malfunctioning issues and saving money in terms of device replacement cost.

Leave a reply

Your email address will not be published. Required fields are marked *

Shopping cart

0
No products in the cart.
Enter your search & hit enter
X